The stainless steel radiator made of 304 stainless steel is an improved design of the original steel radiator, which is not resistant to corrosion, unclean, easy to rust, and short in life.

It can replace all other copper radiators only by changing the heat transfer coefficient. Made of steel and steel radiators, the size can be customized according to needs.
The stainless steel radiator can be combined in multiple rows or groups. The finned tube specifications are 18*2-38/3.2, 22*2-52/5, 25*2-55/5, etc., in a spiral shape.

Stainless steel composite aluminum fins with reasonable cost performance can also be used, the specification is 25*2-50/2.5.
Finned tubes and tube sheets are connected by argon arc welding.
Welds are passivated first, and then penetrated to ensure product quality.
The air can be cooled by passing in low-temperature water or salt water, and the air can be heated by passing in high-temperature water or steam.

Because it is made of 304 stainless steel, it is suitable for any heating, air conditioning, cooling, dehumidification, drying, and it is a special corrosion-resistant, clean and beautiful good and practical heater for dairy products, medicine, chemical industry, food, etc.
After the stainless steel radiator equipment is formed, it is subjected to a water pressure test of 16 kg/cm2, and the pressure is kept for 30 minutes.

The national standard grade (304, 321, 316, etc.) stainless steel can be used as the main material.
The product has the characteristics of high corrosion resistance, and is suitable for occasions where the medium is corrosive to a certain extent, or the process requires cleanliness of the medium.
It does not need to be filled with water for maintenance, so maintenance is simple.
The material is corrosion-resistant, not easy to leak, and has a long service life (4-5 times that of ordinary carbon steel radiators).
Calculated according to the service life, the economic advantages are obvious.

The appearance of stainless steel radiators generally needs to be passivated, polished, or sandblasted to achieve a beautiful appearance.
If only the medium in the tube is corrosive to a certain extent, the material can be stainless steel composite aluminum finned tube, and the high-efficiency heat transfer of aluminum fins can be used to achieve the purpose of high-efficiency heat transfer.